Recent Articles
What to do if Edgecore Device LEDs are not glowing?
LED Not Glowing on Device 1. Issue All LEDs on the front panel of the switch were not glowing since first use, even though the device itself was fully functional. The LEDs remained OFF throughout the entire boot process even after power cycling. 2. ...
How to Configure snmp in broadcom sonic
SNMP Overview Simple Network Management Protocol (SNMP) is a widely used application-layer protocol that enables centralized monitoring and management of network devices such as switches, routers, and servers. It supports real-time alerts, ...
How to configure BGP
BGP (Border Gateway Protocol) Objective BGP (Border Gateway Protocol) is the protocol that enables the global routing system of the internet. It manages how packets get routed from network to network by exchanging routing and reachability information ...
How to configure ACL
ACL (Access Control List) Objective An access control list (ACL) consists of one or more access control entries (ACEs) that collectively define the network traffic profile. Each ACL includes an action element (permit or deny) and a filter element ...
How to add static route globally and under the vrf
Static Routing Static routing is a method where routes are manually configured in the routing table by a network administrator, as opposed to being learned dynamically via routing protocols. It is commonly used in simple or controlled environments ...
SONIC