What are some Basic Monitoring commands ?

What are some Basic Monitoring commands ?

show timezone-list: Displays the full list of available timezones.

 

show boot: Shows the current OS image, the image to be loaded on the next reboot, and lists all available images installed on the device.

 

show clock: Displays the current date and time configured on the system.

 

show environment: Displays platform environmentals, such as voltages, temperatures, and fan speeds.

 

show logging: Displays all currently stored log messages.

 

show platform fan: Shows the status of the device’s fans.

 

show platform firmware status: Displays platform components firmware status information.

 

show platform firmware updates: Displays platform components firmware updates information.

 

show platform firmware version: Displays platform components firmware utility version.

 

show platform pcieinfo: Shows the status of PCIe.

 

show platform psustatus: Displays the status of the device’s power supply units.

show platform ssdhealth: Displays health parameters of the device’s SSD.

 

show platform summary: Provides a summary of the device’s hardware platform.

 

show platform syseeprom: Displays information stored on the system EEPROM.

 

show platform temperature: Shows the status of the device’s thermal sensors.

 

show reboot-cause: Displays the cause of the previous reboot.

 

show reboot-cause history: Shows the history of the previous reboots (up to 10 entries).

 

show uptime: Displays the current system uptime.

 

show users: Lists users currently logged in to the device.

 

show version: Displays software component versions of the currently running SONiC image.

 

sonic-installer cleanup: Performs cleanup tasks related to the SONiC installer.​

    • Related Articles

    • What are the basic system health and diagnostics check commands for Broadcom SONiC?

      Health Checks: To monitor the health of the SONiC environment, several commands can be utilized: 1. System Health Summary: show system-health summary provides an overview of any critical issues. 2. Power Supply Status: show platform psusummary ...

    • BGP Basic Configuration Commands

      1. Enable BGP Activates BGP on the device with a specified Autonomous System number. Command: router bgp <AS-number> 2. Configure BGP Router ID Sets a unique identifier for the BGP router, usually an IP address to ensure consistent identification. ...

    • What are the Basic Configuration commands ?

      config hostname: Configures the system hostname. config platform firmware install: Installs platform component firmware. config platform firmware update: Updates a platform component firmware from the current/next SONiC image. config set_timezone: ...

    • How to configure LLDP in Broadcom SoNiC?

      LLDP Basic Configurations 1. LLDP modes configuration (receive and transmit) at the interface level Commands- interface range <iface_range_num > lldp <mode> To remove configuration -no lldp <mode> Note- Mode options are receive and transmit . 2. To ...

    • What is the SONiC NetPro Support Suite?

      The SONiC NetPro Support Suite is an all-in-one, comprehensive network support system offered by PalC Networks, designed to ensure your network operates at peak efficiency. It provides 24/7 assistance and professional guidance that goes far beyond ...